Tag: 3PAR

Problem I have an HPE 3PAR StoreServ 7400. I have deleted 2 virtual volumes to increase the free space. After deleting the virtual volumes free space should be increased by around 4TB but the HPE 3PAR management console was showing no change in the free space. …

The Service Processor (SP) is an important part of HPE 3PAR Storage Systems. HPE 3PAR SP has the following functionalities: Real-time monitoring and alerting of the HPE 3PAR HPE Support team performs 3PAR upgrade and maintenance activities through SP Log collection to troubleshoot any issue HP …

Getting the serial number for your 3PAR is one of those regular things you will need support from HPE support team. 3PAR has 2 serial numbers one 3PAR and another one HPE Serial number. Get the Serial Number of 3PAR Storage Use any command from below …

supportshow log supportshow log collects all pieces of information of the SAN switch. For Firmware Analysis HPE support team asks me to send the supportshow log from 8/24 Base 16-ports Enabled SAN Switch. supportshow log can be collected from the SAN switch after login to SAN …

Problem We need to see/verify the IP address and default gateway/route assigned to HPE 3PAR 7400. Environment: HPE 3PAR Model: 7400 HPE 3PAR OS version 3.2.1 (MU3) Solution Login to HPE 3PAR Command Line Interface (CLI) using the credentials. Default login credentials (username/password) are 3paradm/3pardata. Run …

Problem I have exported a new volume of 2TB from my SAN to a Linux server but after scanning and partitioning the disk when I tried to create the physical volume then I got the below error: # pvcreate /dev/mapper/mpathlp1 Device /dev/mapper/mpathlp1 not found (or ignored by …

If an HP-UX server or system is connected to one or more SAN switches through Fibre Channel (FC) HBA cards then it is very important for the storage team they assign the storage to the correct server via WWN numbers of FC HBA cards. nPar: nPar …